Nanobubbles: A Novel Targeted Drug Delivery System

Abstract Nanobubbles are nanometer size bubbles having different constituents of varying physicochemical characteristic for the inner core and outer shell. Nanobubbles are mainly fabricated to improve the stability, bioavailability and improve the biodistribution of the delivered drug to the specific targeted site. Their small sizes bubbles allow the possibility of extravasation from blood vessels into the surrounding tissues and ultrasound-targeted site-specific release with minimal invasiveness. Nanobubbles are developing as important contrast agents for imaging and carriers for drug delivery at targeted region. Sonication is the primary method for preparation of nanobubbles followed by thin-layer evaporation, high shear emulsification, mechanical agitation and coacervation or coalescence. With exposure to ultrasound/extracorporeal shock waves, the drug is liberated from the nanobubbles into the target cells. This review paper is an effort to reveal the different formulation development techniques briefly and varying shell and core content for developing nanobubbles.

Polymer blend: a new approach for eliminating curing effect of aqueous dispersion coatings

The aim of present work was to investigate blends of Eudragit® NE 30D with Aquacoat® ECD using different ratios to eliminate curing effect associated with individual polymers. Propranolol HCl 10% w/w was layered onto sugar cores using 5% w/w HPMC as a binder. Drug-layered-cores were coated either with pure or blends of Aquacoat® ECD: Eudragit® NE 30D in a fluidized bed coater to obtain 20% w/w coating level. Talc 35% w/w was used as anti-tacking agent. The pellets were characterized for in vitro dissolution studies, morphology, water uptake-weight loss, osmolality and adhesion of coating after curing at 60 °C or 60 °C/75% RH for 24 h. The findings revealed that Aquacoat® ECD coated pellets showed curing effect due to further gradual coalescence of polymeric particles which resulted into better film formation upon curing. In contrast, the curing effect of Eudragit® NE 30D coated pellets was caused by decrease in adhesion of coatings after curing which provided entirely different swelling behavior of uncured (localized swelling) and cured (uniform swelling) pellets. The undesired curing effect of individual polymers was eliminated by using their blends in appropriate ratio.

Desenvolvimento de biomateriais à base de quitosana: matriz de fibras eletrofiadas para regeneração tecidual e de hidrogel coacervado para entrega controlada de fármaco / Development of chitosan-based biomaterials: electrospun fiber matrix for tissue regeneration and coacervate hydrogel for controlled drug delivery

Os atuais avanços no desenvolvimento de biomateriais caminham para 2 áreas promissoras: a de regeneração tecidual e a de entrega controlada de fármacos. Assim, o presente estudo objetivou a síntese e caracterização de diferentes matrizes (fibras e hidrogel) à base de quitosana, a fim de se obter materiais biomiméticos para atuação em ambas áreas. Para regeneração, delineou-se a síntese de um arcabouço de fibras de quitosana com e sem cristais de nanohidroxiapatita onde, para isso, foram eletrofiadas soluções de quitosana (Ch) e de quitosana com nanohidroxiapatita (ChHa). Os espécimes de Ch apresentaram maior homogeneidade e maior diâmetro médio de fibras (690 ± 102 nm) que ChHa (358 ± 49 nm). No teste de viabilidade celular e na atividade da fosfatase alcalina não houve diferença estatística entre os grupos experimentais (Ch e ChHa), porém ambos diferiram do grupo controle (p < 0,001). Para o âmbito de liberação de fármacos, sintetizou-se, pela técnica de emulsão, dois tipos de hidrogéis: o primeiro, uma mistura da fase aquosa da solução de Ch (1 mL) e da solução de DNA (1 mL) (1:1) e o segundo, mistura da fase aquosa da solução de Ch (1 mL) e solução de Pectina (1 mL) (1:1). Ambas misturas foram realizadas em álcool benzílico (5 mL) com instrumento de dispersão de alto desempenho (31-34000 rpm min-1 por 5 min). Após a obtenção dos géis, 20mg de cada grupo foram imersos em uma solução aquosa de Própolis Verde (PV), na concentração de 70 µg/mL por 2 h e a cinética de liberação do PV foi analisada a 25 e 37oC em água e saliva artificial. Os espécimes obtidos foram liofilizados e depois caracterizados físicoquimicamente. A presença de pectina e de DNA foi comprovada por FTIR. A sorção de PV induziu uma modificação significativa da superfície do gel. Constatou-se uma separação de fases entre a quitosana e o DNA. A eficiência do encapsulamento não mudou significativamente entre 25 e 37oC. A cinética de liberação na água ou na saliva apresentou um mecanismo de duas etapas. E os resultados biológicos exibiram que esses materiais são aceitáveis no ambiente biológico. Assim, conclui-se que a matriz de fibras de quitosana com nHAp é capaz de promover diferenciação celular e a matriz de hidrogel de quitosana com Pectina ou DNA possui potencial para a liberação controlada de fármacos(AU)

Current advances in biomaterial development are moving to 2 promising areas: tissue regeneration and controlled drug delivery. Thus, the present study aimed the synthesis and characterization of different matrices (fibers and hydrogel) based on chitosan, in order to obtain biomimetic materials for performance in both areas. For regeneration, the synthesis of a scaffold of chitosan fibers with and without nanohydroxyapatite crystals was delineated, where chitosan (Ch) and chitosan with hydroxyapatite (ChHa) solutions were electrospun. Ch specimens presented higher homogeneity and larger mean fiber diameter (690±102nm) than ChHa (358 ± 49nm). In the cell viability test and alkaline phosphatase activity there was no statistical difference between the experimental groups. (Ch and ChHa), but both differed from the control group (p < 0,001). For the drug release scope, two types of hydrogels were synthesized by the emulsion technique: the first, a mixture of the aqueous phase of Ch solution (1 mL) and DNA solution (1 mL) (1:1) and the second, mixture of the aqueous phase of the Ch solution (1mL) and Pectin solution (1 mL) (1:1). Both mixtures were performed in benzyl alcohol (5 mL) with high performance dispersion instrument (31-34000 rpm min-1 for 5 min). After obtaining the gels, 20mg from each group were immersed in an aqueous solution of Propolis Green (PV), at a concentration of 70 µg/mL for 2 h and the release kinetics of PV were analyzed at 25 and 37oC in water and artificial saliva. The obtained specimens were lyophilized and then physically-chemically characterized. The presence of pectin and DNA was confirmed by FTIR. PV sorption induced a significant modification of the gel surface. A phase separation was found between chitosan and DNA. Encapsulation efficiency did not change significantly between 25 and 37oC. The release kinetics in water or saliva presented a two-step mechanism. And the biological results showed that these materials are acceptable in the biological environment. Thus, it is concluded that the nHAp chitosan fiber matrix is capable of promoting cell differentiation, whereas the chitosan hydrogel matrix with Pectin or DNA are potential biomaterials for controlled drug release(AU)

Solid dispersion-based pellet for colon delivery of tacrolimus through time- and pH-dependent layer coating: preparation, in vitro and in vivo studies

The intent of the present investigation is to develop and evaluate colon-specific coated tacrolimus solid dispersion pellet (SDP) that retards drug release in the stomach and small intestine but progressively releases in the colon. Tacrolimus-SDP was prepared by extrusion-spheronization technology and optimized by the micromeritic properties including flowability, friability, yields and dissolution rate. Subsequently, the pH-dependent layer (Eudragit L30D55) and time-dependent layer (Eudragit NE30D and L30D55) were coated on the SDP to form tacrolimus colon-specific pellets (CSP) using a fluidized bed coater. Under in vitro gradient pH environment, tacrolimus only released from CSP after changing pH to 6.8 and then quickly released in the phosphate buffer solution of pH 7.2. The Cmax of CSP was 195.68 ± 3.14 ng/mL at Tmax 4.5 ± 0.24 h where as in case of SDP, the Cmax was 646.16 ± 8.15 ng/mL at Tmax 0.5 ± 0.03 h, indicating the ability of CSP targeted to colon. The highest area under the curve was achieved 2479.58 ± 183.33 ng·h/mL for SDP, which was 2.27-fold higher than tacrolimus suspension. However, the best biodistribution performance was achieved from CSP. In conclusion, SDP combining of pH- and time-dependent approaches was suitable for targeted delivery of tacrolimus to colon.

Development and characterization of pullulan-polymethacrylate free films as potential material for enteric drug release

ABSTRACT Free films of pullulan-polymethacrylate associations were produced by casting process to develop a novel target-specific material. For characterization, tests of water vapor permeability, swelling index, infrared absorption spectroscopy, thermogravimetric analysis, scanning electron microscopy and mechanical analysis were performed. The polysaccharide concentration directly influenced vapor permeability and swelling, increasing the values of the latter up to five times when added in a proportion of 20% (per weight). The individual properties of each polymer were maintained, and chemical interactions were not detected. The films were found to be thermally stable and they had unaltered mechanical properties with the addition of the polysaccharide. The microscopic analysis revealed rugosity that was proportional to pullulan and disorganization of the polymer network at pH 6.8. These results suggest that this novel material has potential for enteric drug release because of synergism between pH and enzyme dependence.

Preparation and evaluation of cosmetic patches containing lactic and glycolic acids.

BACKGROUND: Alpha-hydroxy acids such as glycolic acid (GA) and lactic acid (LA), are used in cosmetic patches. The important fact in cosmetic patches is its suitable adhesion and peel properties. AIM: The objective of this study was to prepare LA- and GA-containing cosmetic patches and evaluate in-vitro/in-vivo correlation of adhesion properties. METHODS: Pressure-sensitive adhesives with different concentrations of GA and LA were cast on a polyethylene terephthalate film. The patches were evaluated for peel adhesive strength. On the basis of in vitro adhesion properties the patches were selected for wear performance tests and skin irritation potential. RESULTS: The adhesion properties (adhesion to steel plate and skin) and cohesive strength tests indicated the substantial influence of GA and LA concentrations. Based on in vitro adhesion studies the patches containing 3% (w/w) GA were selected for in vivo studies. In vivo studies show that a formulation containing 3% GA displays good adhesion on the skin, but it leaves little residues on the skin. Skin Irritation studies on healthy human volunteers showed negligible erythema at the site of application after 48 h. CONCLUSION: The noninvasive patch test model was found useful for detecting irritant skin reactions to the cosmetic patch containing GA. Our results demonstrated a strong correlation between the adhesion to steel plate and adhesion to skin. But a weak correlation between the degree of adhesive residue on the skin in in vitro and in vivo tests was observed for the formulation containing 3% (w/w) GA.

Errores en el proceso de dispensación de medicamentos: descripción de un caso con intervención / Errors in the process of dispensation of drugs: description of a case with intervention

En el contexto del despacho de medicamentos es permisible que puedan ocurrir errores y con el fin de analizar ese problema en este estudio, se documentó los errores ocurridos durante el proceso de dispensación de medicamentos en un servicio de farmacia con un promedio mensual de 25000 recetas, un farmacéutico y 8 técnicos, de un hospital periférico de la Caja Costarricense de Seguro Social, de febrero a junio del año 2000. Se aplicó la metodología del Mejoramiento Continuo de la Calidad, al identificar y seleccionar un problema que debía confirmarse; se caracterizó y analizó, para finalmente implementar medidas correctivas. Durante el período y en días hábiles con jornada de 7 am a 4 pm, el farmacéutico o el técnico que le asiste, detectaron y contabilizaron los errores ocurridos según cada etapa: 859 en 18 días de la confirmación del problema, 629 en 28 días de caracterización de los errores y 496 en 27 días post-implementación de medidas correctivas. Los errores más frecuentes fueron: uso de la clave inadecuada para señalar en la etiqueta la indicación médica, conteo incorrecto, etiqueta pegada al medicamento incorrecto y ausencia de indicaciones especiales; los menos frecuentes estaban relacionados con el acopio de medicamentos vencidos y la entrega incorrecta de los medicamentos. Con la estrategia a corto plazo para un cambio general de actitud del personal sobre su forma de trabajo, se disminuyó en un 57.7 por ciento la ocurrencia de errores y, dos años después, se reestructuró y acondicionó el área física del servicio, como una contribución más para facilitar la optimización del proceso. En la dispensación de medicamentos, el recurso humano es de vital importancia y requiere de condiciones físicas adecuadas, así como educación y disposición para el trabajo, todo ello bajo la modalidad de MCC para lograr el éxito en sus gestiones.